Personal Air Shower
The air shower is employed to determine the clothing of the operator entering a controlled contamination room ( cleanroom ) or exiting from an area infected or contaminated with powders which must not propagate outside. The air shower is designed on the basis of the personnel flow study.
The machine is entirely manufactured in stainless steel AISI 304 or 316, scotch brite or polish finished , or in carbon steel , internally and externally painted colour RAL 9010.
A specific software ensures the ideal process conditions. Doors can be directed on request and according to the access point, positioned on the front, at the corner or on three sides (3 doors version ).
Material Air Shower
The operating principle is based on the action of filtered air jets , HEPA degree according to ISO EN 14644-1 standards, which at 25 m/sec ~ speed cause the detachment of inert or inactive particles keeping them off of materials passing through the shower.
Material can pass through the air shower in both directions with different procedures.
A specific software ensures the ideal process conditions.The air shower can have glass doors with aluminium frame or rapid roll-up doors : it depends on the shower dimensions , the type of passing material and the type of handling.
Doors can be directed on request and, according to the access point, positioned on the front , at the corner or on three sides as required and placed in a frontal position, at angle or on three sides (3 doors version).